#### SEMIAUTOMATIC DEVICES FOR BENDING PIPES WITH PROGRAM MANAGEMENT

**Models IO622A, IO622B**

Img. 1

Img. 2

SPECIFICATION | |||
---|---|---|---|

Models | |||

IO622A | IO622B | ||

Diameter of bent pipes, mm | |||

The least | 6 | ||

The greatest | 20 | ||

The greatest thickness of a wall of a bent pipe in diameter of 20 mm, mm | 2 | ||

The moment of resistance of a bent pipe at kgs/cm2, no more, than sm3 | 0,46 | ||

The attitude of thickness of a wall to diameter of a pipe, not less | 1 : 16 | ||

Internal radius of bending (but not less than two diameters), mm | |||

The least | 20 | ||

The greatest | 150 | ||

The greatest length of the end of the initial material, mm | 2700 | 1600 | |

The greatest angle of bending, degrees | 180 | ||

The greatest quantity of bending within the limits of one preparation | 10 | ||

The greatest number of planes of bending | 10 | ||

Pressure of air, kgs/cm2 | 4-6 | ||

Height of an axis of a bent pipe above a level of a floor, mm | |||

Without a support | 1245 | ||

With a support | 1745 | ||

Overall dimensions of a semiautomatic device, mm | |||

width | 1160 | 1160 | |

length | 4355 | 3295 | |

Height | 1670 | 1670 | |

Weight of a semiautomatic device, kg | 2290 | 2170 |